Introduction

  1. BakhTUjNeZPv2lab
    • Turn the device over to its back

    • Notice the two screws on the back. These are the screws we will need to unscrew.

  2. Nk2YFQYuhZEkT1r2
    Nk2YFQYuhZEkT1r2
    IuOdsNS4ivGGGpNd
    • After unscrewing them, lift up the protective back shield and put it to the side.

  3. ilKyUlZNo6keUK6X
    ilKyUlZNo6keUK6X
    S5JgR2JbISdGZooW
    • In the gap at the top of the battery, pull up. This will pull out the battery.

    • Put the battery to the side.

  4. M4fGWVVfHnrHBc2L
    • You have removed the battery and gained access to the SD and sim trays.

    • Here you can replace, remove, or insert new SD/sim cards or put a new battery in where the old one was.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Timothy McEvoy

Member since: 22/01/18

1090 Reputation

0 comments