Sony Cyber-shot DSC-P100 Front Casing Replacement

Written By: Katie McCraw
  • Comments: 1
Sony Cyber-shot DSC-P100 Front Casing Replacement

Difficulty

Moderate

Steps

4

Time Required

5 minutes

Introduction

This is a step by step guide to uninstalling the front casing of the camera.

  1. ZJflBPTMEqyWujYq
    ZJflBPTMEqyWujYq
    WGWlAsdl6Ix5Osy1
    VHibyyCUfTNDKhNR

    • First locate the appropriate screws for detachment.

    Hi, is this fórum working yet?

    I need tô replace my Sony P100 infernal batery.

    Leonardo -

  2. m5M5VL1iXmIbr53V

    • Remove the five screws shown using a Phillips #00 Screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

  3. TJ5tAxZiLRaxmETX

    • Using a spudger, carefully pry open the front casing.

  4. gMXKvZEWfr2mb24g
    gMXKvZEWfr2mb24g
    AH6CIFSsfKAb2QkL

    • Carefully separate the front casing from the camera body.

    • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Katie McCraw

Member since: 09/03/12

191 Reputation

0 comments