Sony Walkman NWZ-E438 Headphone Jack Replacement

Written By: Cheryl Zinn
  • Comments: 2
Sony Walkman NWZ-E438 Headphone Jack Replacement

Difficulty

Moderate

Steps

5

Time Required

No estimate

Introduction

  1. vQSb4sNqDikSihtU

    • Unscrew the two screws on the back of the device using a Phillips PH000 screwdriver.

    • Keep the Phillips PH000 screwdriver aside for further steps in the guide. It will be the only screwdriver needed for this replacement.

  2. l3UtXVHPL6KWviBn

    • Use a small prying tool to carefully pry open the back of the device.

  3. ljnYJg3oHLGdWaxh

    • Unscrew the 1 screws around the headphone jack using Phillips PH000 screwdriver.

  4. X2Ooxt4ERn4IWhPG
    X2Ooxt4ERn4IWhPG
    k566ywP2op1juBuw

    • Using the fine pointed tweezers, unplug the cords connecting the headphone jack to the chip.

  5. 3BVIwT63Ka3tUXst
    3BVIwT63Ka3tUXst
    kBcD2nZdcVBDXJtF
    vBbG2xGkQBiBydyg

    • Remove the headphone jack.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Cheryl Zinn

Member since: 08/10/15

525 Reputation

2 comments

hi there, i have mine apart but where do i get a spare one to refit, please help

lee manock -

Can you make a tutorial on how to replace the headphone jack on the sony nwz-s774?

petermedz -