Surface Laptop Studio Lower Case Replacement

Written By: Connor Bassolino
  • Comments: 0
Surface Laptop Studio Lower Case Replacement

Difficulty

Easy

Steps

5

Time Required

10 - 15 minutes

Introduction

Use this guide to replace the lower case on your Microsoft Surface Laptop Studio.

  1. disBkJLYKsWyOnFC

    • Remove the rubber cosmetic strip along the outside edge of the back plate with tweezers.

  2. DymSIV2GPBF4IXwp
    DymSIV2GPBF4IXwp
    lkFYS5RPvf51M4NF

    • Remove the two rubber feet on the lower case with an opening tool.

  3. BQeCc2EHYUb4frIq

    • Remove the two screws with a T3 Torx screwdriver.

  4. c3A3HPFhTiu26TnT

    • Remove the seven screws securing the lower case with a T3 Torx screwdriver.

  5. kRIiVor6o5EqdNoD
    kRIiVor6o5EqdNoD
    diJVsnGVIsMcPrlE

    • Lift the lower case gently and set it above the device.

    • Take care not to strain the battery cable as you move the lower case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Connor Bassolino

Member since: 29/03/22

3662 Reputation

0 comments