Turtle Beach Ear Force X12 Ear Pads Replacement

Written By: Katha Patel
  • Comments: 0
Turtle Beach Ear Force X12 Ear Pads Replacement

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

If your Microphone on your Turtle Beach Ear Force x12 isn't working properly when you speak into it, it can be caused by a faulty microphone. Use this guide to replace the faulty part on your Turtle Beach Headset.

The microphone on the Turtle Beach Ear Force x12 is used to communicate with people online. If your voice isn't transmitted clearly when you speak into the microphone then there is a mechanical, or electrical  issue which can be caused by excess use, drops, or dirty microphone.

  1. B1SpE6JZOZPFBqyN

    • Start by removing the left ear pad.

    • Gently pull on the pad from the side by the leathery material until it comes loose from slot.

    • Be careful not to rip the fabric.

  2. ilDIRuRJ3IHKqRMn

    • Grip ear cushion and carefully pull up and separate from the plastic headphone.

  3. dU3IFJAOCMYHVTqQ
    dU3IFJAOCMYHVTqQ
    W3wdIgOVAot44oqo

    • Your headset should look like the first picture, with the left cushion removed.

    • Repeat these steps for right cushion.

    • You may now continue with more complex inner headset repair, or replace the ear pads by sliding on new ones in the slot.

Conclusion

To reassemble your device, slip on new cushions

Author

Katha Patel

Member since: 02/10/17

218 Reputation

0 comments