Vtech Kidizoom Smart Watch DX Master Switch Replacement

Written By: Amber Hamlet
  • Comments: 2
Vtech Kidizoom Smart Watch DX Master Switch Replacement

Difficulty

Easy

Steps

4

Time Required

3 - 5 minutes

Introduction

Is your master switch stuck or non-functional? This guide will show you how to replace it.

  1. XvXTq16eI1hk6jf1

    • Make sure the master switch is "OFF" before disassembly, to avoid an electric shock.

    • Flip the watch over with the back facing up.

    can you add some infomaton on what kids can do to fix it

    Kehinde Abiodun -

  2. G1RJlrYb3vNUIKkk

    • Remove the four 6.0 mm screws on the back plate with the Phillips #00 screwdriver.

    I can't get the last two screws off!

    Grant Garbe -

  3. W5wMmGAUfCPAWMuu

    • Gently pull the back plate from the watch casing.

  4. aRkGrp4sxDofQlrJ
    aRkGrp4sxDofQlrJ
    VJ4pBJ4iV2OGXiwm

    • Lift the master switch from the circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Amber Hamlet

Member since: 20/01/16

351 Reputation

0 comments