Xbox 360 E Wi-Fi Card Replacement

Written By: Jennifer
  • Comments: 3
Xbox 360 E Wi-Fi Card Replacement

Difficulty

Moderate

Steps

5

Time Required

5 minutes

Introduction

When you can't download the game you just have to have follow this guide to replace your Wi-Fi card.

  1. TIkfryCTehaILEu6

    • Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.

    • Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

  2. ERPkKFArPRTshPPh

    • Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.

    • Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

  3. 21WAeRRGNRrebZwO
    21WAeRRGNRrebZwO
    MfoUiSTn2qFjbOLj
    UvvehPt1bmaqMb4V

    • Continue sliding the spudger along the perimeter of the left grated face of the Xbox.

    • Pull the top panel off.

  4. dGaeBuMn56SHFP4U

    • Remove the 11 mm screw left of the green wifi-card using the T9 Torx screw bit.

    In my case it was a T10 Screw, not T9

    Limer o -

  5. Z53XUDpwcU4pDQCT
    Z53XUDpwcU4pDQCT
    BUKBFeZEMwrv1ImF

    • Firmly grip the green Wi-Fi card and pull it out of the Xbox.

    On that wifi card there is a little port that you can plug and old router antena into. Any idea what its called?

    Tyler Goyette -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jennifer

Member since: 03/02/14

1879 Reputation

One comment

Nicely done!

dakota.1970 -