ZTE Awe Camera Replacement

Written By: Jennifer DeMeo
  • Comments: 1
ZTE Awe Camera Replacement

Difficulty

Easy

Steps

7

Time Required

15 - 20 minutes

Introduction

This guide will show you how to replace the camera in case it breaks or no longer works.

  1. TlRE1HyDauFPggIs

    • Remove the back cover of the phone to expose the phone's mid-frame.

  2. LiqXFnrtxqKbArWY

    • Pry the battery up and out of the phone.

    Still Not Helping

    Eboni -

  3. KRCeWDhjkZIEcCai

    • Lift the battery out of the phone.

  4. V1CgsVpkRgYdg61t

    • Use the Phillips Head 00 screw driver to unscrew the seven 0.1mm screws along the perimeter of the phone's mid frame.

  5. ERZDXGARWXRsPbE3
    ERZDXGARWXRsPbE3
    viVEtTtJHklwPDTl
    Dmoqtr3WdRxxMaxw

    • Wedge the flat end of the spudger between the mid frame and the digitizer.

  6. TLLFqgLCRBYfGKHq
    TLLFqgLCRBYfGKHq
    6oRNNckJXFKo2PDY
    QYIJPZvDlvFuiMI5

    • Gently pry the mid frame away from the rest of the phone to expose the motherboard.

  7. NQJxjZK42JOxMBQP
    NQJxjZK42JOxMBQP
    JoHJDT3EJIK2VqpE
    WsxVtOXTAcqlMyYb

    • Use the tweezers to grip the back facing camera. Gently pull until the camera is completely removed from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jennifer DeMeo

Member since: 07/10/14

1035 Reputation

0 comments