Introduction
Removing the cameras of the ZTE Speed is a very simple process, proceed below!
-
-
Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.
-
-
-
With the plastic opening tool the spudger, gently pry off the inner back seal around the phone.
-
Be careful not to pry it off too harsh, as it is just plastic.
-
-
-
With the spudger, gently pry off camera at the top-middle of the phone to get back camera.
-
With the spudger, gently pry off camera at the top-left of the phone to get the front camera.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
