Introduction

Prereq only guide

  1. FIbrSroESTRLSW5f
    • Remove the two T8 Torx screws securing the upper bracket to the hard drive.

    • Remove the upper bracket from the hard drive.

  2. dvkZFUDrXyIkROKK
    • Remove the two T8 Torx pins from the other side of the hard drive.

  3. iDxZAcIEGtBXmmEr
    • Carefully peel off the piece of EMI foam attached to the front of the hard drive.

    • Don't forget to transfer this to your new hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Bookholt

580376 Reputation

0 comments