iMac Intel 21.5" EMC 2638 Fan Replacement

Written By: Sam Goldheart
  • Comments: 0
iMac Intel 21.5" EMC 2638 Fan Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

Prereq to remove fan after hard drive brackets.

  1. MkTJwvORcrF5CvyT
    MkTJwvORcrF5CvyT
    QgRPqJhkQUc1vXIW

    • Gently pull the fan cable connector straight away from its socket on the logic board.

  2. 2o6AJAWJjZVimeXw

    • Remove the three 12.3 mm T10 shoulder screws securing the fan to the rear enclosure.

  3. TRvDCxgBsRa6wvKc
    TRvDCxgBsRa6wvKc
    3rJnTaH3BFpND4J6

    • Remove the fan from the iMac.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sam Goldheart

Member since: 19/10/12

459484 Reputation

0 comments