iMac Intel 21.5" EMC 2638 SATA Data and Power Cables Replacement

Written By: Sam Goldheart
  • Comments: 0
iMac Intel 21.5" EMC 2638 SATA Data and Power Cables Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Prereq only.

  1. wgGTWBcUETEWFaPW
    wgGTWBcUETEWFaPW
    GWWWXJ5nfW6BufTF

    • Grasp the hard drive power connector and gently pull it out of its socket on the logic board.

  2. bSSujLTFPerySnwB
    bSSujLTFPerySnwB
    wEWYitq6ZKISQsOv
    Nf1VIyTxmnlbQXvc

    • The SATA data connector has a clip that must be pressed to allow removal.

    • While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sam Goldheart

Member since: 19/10/12

459484 Reputation

0 comments