iMac Intel 21.5" EMC 2805 Display Assembly Cables Replacement

Written By: Walter Galan
  • Comments: 1
iMac Intel 21.5" EMC 2805 Display Assembly Cables Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Prereq to remove the display.

  1. OHrDRCyrMC1cUGLi
    OHrDRCyrMC1cUGLi
    T63ZLhEPNFe4ZxCU
    2RPghHkKPbf4ZJKv

    • Use a pair of tweezers to flip up the metal retaining bracket on the display data cable.

    • Carefully pull the display data cable from its socket on the logic board.

    • Be sure to pull the display data cable connector straight out of its socket.

    Does anyone know where to find a replacement display cable for the 2014?

    PN: 923-00047

    PBMedic is out of stock

    Brian Hernandez -

  2. RxQmtXvRiwN2ghuG
    RxQmtXvRiwN2ghuG
    YWVFQeaXe1PNSF1N

    • While holding the display up with one hand, use the other hand to unplug the display power cable.

    • Lift the display up enough to have easy access to the connector, but not so much that you stretch the cables and stress their connections (about 8").

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

687819 Reputation

0 comments