iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement

Written By: Evan Noronha
  • Comments: 0
iMac Intel 21.5" Retina 4K Display AirPort/Bluetooth Card Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Prereq only for removing the AirPort/Bluetooth card from the logic board.

  1. YApPuCUsMVg6YPrs

    • Remove the two 3.3 mm T5 Torx screws securing the AirPort/Bluetooth card to the logic board.

  2. WDUdywjEs1iUDrGa
    WDUdywjEs1iUDrGa
    MRMBswtVj1mSZFBC
    M1X2pkgXfKycMWCo

    • Slightly lift the AirPort/Bluetooth card and pull it straight out its socket.

    • Do not use excessive force to pull the end of the AirPort/Bluetooth card away from its socket on the logic board. Doing so may damage the socket.

    • When reinstalling the card, be sure it is properly seated before reinstalling the retaining screws.

    • If the AirPort/Bluetooth card is properly seated, its screw holes should align with those on the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Evan Noronha

Member since: 06/02/15

220127 Reputation

0 comments