Introduction
Use this guide to replace or upgrade your RAM chips.
-
-
Lay your iMac front side down on a table with the lower edge facing yourself.
-
Loosen the single Phillips screw PH#2 in the center of the access door.
-
Remove the access door from your iMac.
-
-
-
Use the sharp end of a spudger to pull the black plastic RAM tabs out of the memory bay. Formatting help
-
Pull the black plastic RAM tab away from your iMac to eject the RAM chip.
-
-
-
Grab the RAM chip by its edges and pull it straight out of its slot.
-
If two RAM chips are installed, repeat this process for the other chip.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
