Introduction
Will show the process of taking apart of computer mouse that uses a ball for the process of tracking motion.
Tools
- 
                  
                  
- 
            
Rotate mouse over and locate Trackball cover
 - 
            
Using index fingers and thumb, rotate counter-clockwise
 
 - 
            
 - 
                  
                  
- 
            
After the Trackball cover has been rotated, pry the lid off using fingernails.
 - 
            
Remove Trackball cover and place to the side.
 - 
            
Angle mouse to eject Trackball from the casing.
 
 - 
            
 - 
                  
                  
- 
            
Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside.
 - 
            
Lift the two cases apart and place screw to the side.
 
 - 
            
 - 
                  
                  
- 
            
Remove the wire from the plastic casing near the top of the mouse.
 - 
            
Lift up to remove the PCB which is attached to the mouse.
 - 
            
Place case to the side.
 
 - 
            
 - 
                  
                  
- 
            
Locate where the wire is connected to the PCB via the white connection.
 - 
            
Pry the connections apart and place the cable to the side.
 
 - 
            
 
2 comments
Wow! Someone really worked hard on this guide. Kudos sir.
Yes sir I won't know everything about the machine