1975-1983 BMW 3 Series Taillight Disassembly

Scritto Da: Vintage_Restorations
  • Commenti: 0
1975-1983 BMW 3 Series Taillight Disassembly

Difficoltà

Very easy

Passi

5

Tempo Necessario

30 secondi - 1 minuto

Introduzione

  1. X5gSEIfSdmMrNdLG

    • This is the best guide to disassembling your BMW E21's taillights to replace a bulb.

  2. fHpRJLZYUnsOhCP6
    fHpRJLZYUnsOhCP6
    ChRMPxLDauOTwStm
    rmRhCjWor5Uo1ZTZ

    • Remove the two plastic nuts holding the taillight lens in the housing.

    • I recommend putting a towel in the trunk/boot so the plastic nuts do not get lost under the carpet.

  3. mBRklsZipClgryLS
    mBRklsZipClgryLS
    XkJy4PU4M661RKcL

    • Pull the taillight lens out of the housing.

    • Be sure to use both hands to remove the lens instead of one hand, especially if your taillight lens is cracked. (If you try to remove the lens while using one hand, the lens may get stuck on the screw stud and snap off.

  4. op1HL6DReVdJUfkY

    • Remove the light bulb by pushing into the housing on the bulb gently, and then unscrewing it and pulling it out.

    • Do not grip the bulb too hard, it may break!

  5. ed3YX6wJLGavTLTQ

    • The bulb now functions as intended. Good job!!

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Vintage_Restorations

Membro da: 31/07/23

191 Reputazione

0 commenti