Introduzione

Windshield wipers keep rain, sleet, and snow off of your windshield increasing visibility as you drive. It is dangerous and in most cases illegal to drive without working wipers.

If you have never changed your windshield wipers before, it can be a little difficult without instructions. The way the blades are designed, if you do not know about the blade you may not be able to replace the blade just by looking at it.

This guide will show you how to replace the windshield wipers of your 10th Generation Ford F-150 in a few easy to follow steps. This guide demonstrates the steps on a 2004 Ford F-150 but it should apply to all Ford F-150s trucks from this generation.

Before beginning this repair, be sure to turn off your truck and put it in park.

  1. toGp2KLumRAMlEnn
    toGp2KLumRAMlEnn
    JYlOT2iQRWhsYeSj
    • Lift the wiper blade off the windshield.

  2. 4FfjeIIjsBGHFIyF
    4FfjeIIjsBGHFIyF
    ydAKHOQsGgNVQEHA
    • Squeeze and push the clip holding the wiper in place towards the wiper arm.

    • This step does not require a lot of force, and should be done without forcing the wiper.

  3. M3BkiQZtNFnFpFfV
    M3BkiQZtNFnFpFfV
    1YE1NnjSH6hWMKmw
    • Push the old blade down and away from the wiper arm to disconnect it.

  4. oYZceja223LK3ogK
    oYZceja223LK3ogK
    GRBUxYshGhaP3Cuf
    1tdgADbIVkDTQUvm
    • Position the new blade so the hook is pointed towards the blade attachment.

    • Put the hook over the top of the blade attachment.

  5. hIKMvlYVqmmeINsw
    hIKMvlYVqmmeINsw
    PQpLCBP6N2bOBpBw
    • Pull the blade to the end of the arm.

  6. rCT5lidP5cLUjc4m
    rCT5lidP5cLUjc4m
    4jmyGcFOPoJPiGTj
    • Pull until you hear a click.

    • Do not pull too hard because the clip can break in this process.

    • You are finished!

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jayden Mahon

Membro da: 11/09/23

133 Reputazione

0 commenti