2011-2014 Dodge Challenger Engine Air Filter Replacement

Scritto Da: jhr1091
  • Commenti: 0
2011-2014 Dodge Challenger Engine Air Filter Replacement

Difficoltà

Easy

Passi

9

Tempo Necessario

5 - 10 minuti

Introduzione

This guide will help you replace the air filter on your 2011-2014 Dodge Challenger 3.6L V6 by locating the air filter housing, using a screwdriver or clips to open it, removing the old filter, cleaning the housing if necessary, inserting the new filter with the correct orientation, sealing the housing securely, and checking for a snug fit. Don't forget to dispose of the old filter and record the replacement date.

  1. hnrZpA3kasJlQNFb

    • Pop The Engine Hood Open

    • Reminder- Hood Latch Release is Under the Steering Wheel

  2. Za3LfdDQo2mMWboO

    • Locate The Air Intake In Engine Bay

    • Hint- Should be on the Lower Right-Hand Side

  3. GmDeoeTbTxD5GCwJ
    GmDeoeTbTxD5GCwJ
    NRBVyPFLGY6sNReT

    • Using A Flat Head Screwdriver Remove All 3 Screws Holding In the Air Intake Cover

    • Reminder All 3 screws are the same size 12mm no need to keep track of where they go

  4. pYQVleFUKMtraAHu

    • Using the FlatHead screwdriver Loosen the clamp holding in the Air Intake

    • Tip- Do not fully remove the clamp Just Loosen it

  5. ytnQpiwwcCoU1t1H

    • Remove AIr Intake Lid

    • Tip- Place Intake Lid Above the Intake to not Loosen Hose Going to the Intake

  6. JEXll51ZFBNEZJAR
    JEXll51ZFBNEZJAR
    N5cgiMs4Tbufe4ST

    • Locate and Remove The Air Filter

  7. bM4bqXvofp6CSmXn

    • Insert New Air Filter

  8. tiLrnxGm3RQqRb3c

    • Reapply the Air Intake Lid

  9. IJvmood6wabHfl1C

    • Reapply all 3 Screws For the Intake Lid

    • Tighten the Clamp on the Hose Going to the Intake

Conclusione

Now you Have Completely Replaced Your car's Engine Air Filter.

Autore

jhr1091

Membro da: 29/11/23

169 Reputazione

0 commenti