2013-2018 Jeep Wrangler Key Fob Battery Replacement

Scritto Da: Joy Ewell
  • Commenti: 0
2013-2018 Jeep Wrangler Key Fob Battery Replacement

Difficoltà

Easy

Passi

3

Tempo Necessario

1 - 3 minuti

Introduzione

If your 2018 Jeep Wrangler key FOB only works intermittently, this can cause a problem as the Jeep Wrangler is a push-button start car. This guide will walk you through how to dissemble your key FOB, replace the battery, and reassemble it. Be careful with the internal battery as it could be corroded and needs to be disposed of properly. This guide is simple and can be done quickly instead of paying a high price for a replacement key.

  1. LDhwWc4lWRNDEJUx
    LDhwWc4lWRNDEJUx
    avQCyTwaHFiAMTXX

    • Use a spudger or opening tool to open the key fob by inserting it into the indent on the side of the fob and prying it up.

    • We don't recommend using a screwdriver for prying (as the photo demonstrates) as this could cause damage to the fob or battery.

  2. cPfeAmYbYTLNQRAd
    cPfeAmYbYTLNQRAd
    k1Mx2tNWohGCfXdA
    WfMgfLFkXblElshO

    • Use a spudger to pry the battery up.

    • Don't use a screwdriver to pry a battery. This could damage the battery and is potentially dangerous.

    • Remove the battery.

  3. DhLJSY5psbJCwUCr
    DhLJSY5psbJCwUCr
    1aBRTNxj1nAJPfJa

    • Slide the new battery into the battery slot and click it into place.

    • Place the cover back on the fob and snap it into place.

Conclusione

Now your key should be working again.

Autore

Joy Ewell

Membro da: 24/05/23

97 Reputazione

0 commenti