Acer Aspire 5 A515-46-R3UB Speakers Replacement

Scritto Da: Becca Campbell
  • Commenti: 0
Acer Aspire 5 A515-46-R3UB Speakers Replacement

Difficoltà

Moderate

Passi

8

Tempo Necessario

25 - 50 minuti

Introduzione

If the speakers on your ACER Aspire 5 A515-46-R3UB are not working because there is no sound coming out, or the sound is heavily distorted and you want to replace them, follow this guide to easily replace them. Take a look at the ACER Aspire 5 A515-46-R3UB Troubleshooting page to see if there is an alternative fix before beginning the repair.

Be sure to turn off your laptop and disconnect the charger before you begin.

  1. O2Ps2hilli4QOHHU
    O2Ps2hilli4QOHHU
    ZZLI2jT5UWnS1cY6

    • Use a JIS #1 screwdriver to remove eleven 6.7 mm screws from the bottom cover.

  2. HZr1TlOsOM6S4JEq
    HZr1TlOsOM6S4JEq
    H1T13fgGjDHJxnHJ

    • Use an opening tool and picks to pry the bottom cover from the laptop.

    • Work your way around the perimeter to release any clips before you remove the bottom case.

    • Remove the bottom case.

  3. ywKVY1ZiaxfXcCpW
    ywKVY1ZiaxfXcCpW
    pbArm2cHOpP5SXbw

    • Remove the two pieces of tape from the battery and the battery connector.

    • Save the tape for reassembly.

  4. XGv4tDx3Ouoy2Lf3
    XGv4tDx3Ouoy2Lf3
    5JQrWPIQrxohQBZW

    • Use the plastic opening tool to carefully push on each side of the connector and remove it from the socket.

  5. 3mTLX3Ck3TA133PO
    3mTLX3Ck3TA133PO
    rLhwUcdtkK1rRg1y

    • Lift up the battery and remove it from the bottom case of the laptop.

  6. 1YLTruGByVMFxnbf
    1YLTruGByVMFxnbf
    VSSd5SQgMMQGwSjM
    stq3GHFh2nqm1BFn

    • Lift the speakers off of the mounting pegs.

    • There is a speaker in the bottom left corner and bottom right corner.

  7. aLD2Ns4L3r3BhaGY
    aLD2Ns4L3r3BhaGY
    hcUWZtCdnuNuvYtU

    • Undo the cables connecting both speakers from their routing hooks.

  8. JdGuWyWLFikUd5hm
    JdGuWyWLFikUd5hm
    XpAeqiSJOS6kCFGJ
    gydJEsyNaEZkUHRC

    • Pull the speaker cable away from the connector in the same direction as the individual wires are running.

    • Pull evenly on the full width of the cable so that no individual wires are overly strained.

    • To remove the cable from its mounting position, use a spudger to lift the ribbon cables off of the speaker cord.

    • Now that the speaker cable is released, remove the speakers.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Becca Campbell

Membro da: 13/09/23

361 Reputazione

0 commenti