Introduzione

This guide instructs the reader how to disassemble, extract, replace, and reassemble the LCD monitor for an Acer Chomebook C720-2848.

  1. bKONUg63sOCZUCRA
    bKONUg63sOCZUCRA
    ZNWbZltY1GOY6vna
    • Insert a metal spudger around the inner side of the screens plastic perimeter.

    • Move along the perimeter while leveraging to pop the faceplate out like so.

  2. JbtBZ1QfUQchOpau
    JbtBZ1QfUQchOpau
    2JLSkyXDCFJ5IfZC
    • Remove the faceplate's bottom hinges that connect to the body of the device with the metal spudger. This will free the plastic perimeter, which may now be removed.

  3. OZGJIx5GK33IM1Fl
    • Use a Phillips #0 screwdriver to remove the 6 screws in these circled locations.

  4. 3bm62fLQEAVxxkMN
    • Reposition so the screen will lay flat on the keyboard of the laptop.

  5. eKVaCVYuOIQQclUC
    eKVaCVYuOIQQclUC
    11mVRtwrACc5oSeC
    • Locate the bar code adhesion strip at the base of the screen, and then peel it back carefully. Once peeled back the plug-in will come free.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cory Provost

Membro da: 27/09/17

212 Reputazione

Un commento

In step 2, "the faceplate's bottom hinges" are plastic hinge covers that are (or, at least, were) part of the bezel. You may be able to take the bezel off while they're still attached, or you may have to break the flexing points so that they come off separately. Either way, it doesn't seem to cause a problem.

Thanks, Cory.

Lance ==)--------------

Lance -