Introduzione
Strumenti
- 
                  
                  
- 
            
First begin by flipping the laptop on its back and having the back cover face you directly.
 - 
            
Then unscrew the ten Phillips head screws that hold down the back cover using a Phillips #0 Screw Driver.
 
 - 
            
 - 
                  
                  
- 
            
look for the battery in the bottom half of the computer
 - 
            
Once you have found the battery, look for the screws that secure the battery, in the upper left and right corners.
 
 - 
            
 - 
                  
                  
- 
            
Begin by unscrewing the two Phillips head screws that hold down the battery using a J1 sized screwdriver.
 - 
            
Finally remove the battery from the laptop.
 
 - 
            
 - 
                  
                  
- 
            
Begin by locating the speakers.
 - 
            
Once you have found where the speakers are, direct your attention to the speaker to the left of the mouse pad.
 - 
            
Grab your tweezers and begin disconnecting the wire that connects the speakers to the circuit board on the upper left corner.
 
 - 
            
 - 
                  
                  
- 
            
Locate where the mouse pad would be, this should be relatively easy as it will be right in between the two speakers.
 - 
            
Start peeling off the black tape that is covering the speaker wires.
 - 
            
Fold back the cables that are on top of the wires for easy removal of the speakers.
 
 - 
            
 - 
                  
                  
- 
            
Direct your attention back to the speaker that you were first working with in step 5.
 - 
            
Start by pulling up on the speaker, it should simply come right out.
 - 
            
Repeat this for the right speaker.
 - 
            
Once the two speakers are removed, unhook the wires from any clips that may be holding it to the computer.
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.