Altec Lansing BoomJacket Case Removal

Scritto Da: Ryan Byrnes
  • Commenti: 1
Altec Lansing BoomJacket Case Removal

Difficoltà

Easy

Passi

7

Tempo Necessario

5 - 10 minuti

Introduzione

Are you trying to repair a part inside your speaker but need to first remove the case that surrounds the speakers? This guide will help you do just that!

  1. AE4v4E6vrxSnHuZV

    • Using your hands, remove the pegs (4+4) from the front and back of the speaker.

  2. AAJoEVitKGi3TvBr

    • Remove the outer black rubber housing of the speaker.

  3. gHyes4gihZM2XXU1

    • Remove the inner blue rubber housing from the speaker.

  4. hmF6bjeF1kD3LDjg

    • Pull out the two black wire meshes using a metal spudger.

    • Be careful not to damage the metal casing.

  5. 6QBbuE5Blq1Dt3nH
    6QBbuE5Blq1Dt3nH
    5awbHeyhVgNvEvuN

    • Using tweezers remove the rubber stoppers (4 at the back + 2 at the front).

  6. kV3tH5hjZHg56jDP

    • Using the size PH1 screwdriver remove the screws exposed from the rubber stoppers (4 + 2).

  7. JUEhriNTix1xlyBe

    • Pull the case apart and you will be able to see all the components inside the speaker.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Ryan Byrnes

Membro da: 12/04/17

872 Reputazione

Un commento

Can you buy the black rubber case by it’s self

David O Connor -