Altec Lansing Super Life Jacket Speaker Handle Replacement

Scritto Da: Tien Nguyen
  • Commenti: 2
Altec Lansing Super Life Jacket Speaker Handle Replacement

Difficoltà

Easy

Passi

5

Tempo Necessario

6 - 10 minuti

Introduzione

If your Altec Lansing Super Life Jacket speaker handle damaged, faculty, or loose, use the following step-by-step guide to replace it.

  1. xAYAJf21JQDBNlWL
    xAYAJf21JQDBNlWL
    CPNAiOkXBVJ4PIZi

    • Use your hands to remove the pegs (4) located on both sides of the speaker.

  2. uItIdIL5rh4GDOic
    uItIdIL5rh4GDOic
    6Jw2QqchWQhbj2RV
    GiQGAMjVBTFVxZvM

    • Remove the outer black rubber housing of the speaker.

  3. qbZHnYFPIHHAVyKU
    qbZHnYFPIHHAVyKU
    xIXiAXSotmPp2SOA
    2BTBTMWSuFWfVLXy

    • Remove the inner blue rubber housing from the speaker.

  4. reOCERuKCRLfAb4V
    reOCERuKCRLfAb4V
    1s6GcrV1MNEnEHQt

    • Remove the 4 7.8mm Phillips screws on the speaker cover using the PH0 screwdriver.

  5. Z6T5QRiFRKBWRf3G
    Z6T5QRiFRKBWRf3G
    U5iQIYLWIS3wdQVe

    • Carefully slide the handle off the speaker but pushing upwards to the direction the handle is facing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Tien Nguyen

Membro da: 03/07/18

171 Reputazione

2 commenti

where can i get a battery replacement?

George Delgado -

I ordered mine from Amazon.

James Latta -