Amazon Fire TV Cube Speaker Replacement

Scritto Da: Justice Davis
  • Commenti: 1
Amazon Fire TV Cube Speaker Replacement

Difficoltà

Moderate

Passi

4

Tempo Necessario

25 minuti

Introduzione

This guide will walk you through the step-by-step procedures to remove and replace the speaker in your Amazon Fire TV Cube. These steps are simple, however some require considerable force. To complete this replacement you will need a small screwdriver and opening tool.

  1. JbGiZgxlCWJO5cZS
    JbGiZgxlCWJO5cZS
    FOICIeRAFAEj61rN
    LdTFkj3UIHNONwga

    • Using a metal spudger, push down between the edge seals on the base and pry off the base.

    • Do not confuse the top thin layer of rubber with the thick palette that needs to be removed.

    • This may require substantial force.

  2. RIqQPDAHEdYZPqsw
    RIqQPDAHEdYZPqsw
    WU4MvJMuxc4Og4aX
    AKQOCD4DNGEOlsxJ

    • Use the T-10 bit from the iFixit tool kit to unscrew the four 1.4 inch corner screws on top of the first layer.

    • There are 4 washers to go with each of the screws.

  3. gvOplpZJAZAoZ1iL

    • Lift and remove the full frame.

  4. vormYIKWVm1TUSEK
    vormYIKWVm1TUSEK
    1SEVBTSbsaUNjSdf

    • Lift and remove the speaker.

    • Carefully match the outlets on the speaker with the outlets on the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Justice Davis

Membro da: 27/09/18

228 Reputazione

Un commento

Our volume pauses every 11 minutes! Troubleshooting our Sono’s System…still doing it. Could this be our Fire Cube?

Lee -