Apple iPod Hi-Fi Grille Replacement

Scritto Da: Timothy Scheuermann

Commenti: 1

Difficoltà

Easy

Passi

Tempo Necessario

25 minuti

Introduzione

This guide details how to replace the front grille of the Apple iPod Hi-Fi speaker system.

Strumenti

Passo 1

Warm up the glue by using the hair dryer on the grille for 5-10 minutes.
You can skip this step if you don't have access to a hair dryer. However, if you skip this step, the next step will take longer and will be harder.

Passo 2

Take one spudger and fit it under the grille.
Use your first spudger to pry up and make room to insert a second one.
Sever the glue connections between the grille and the device by moving one spudger around, cutting through the glue.
Use the other spudger to raise the grille, allowing you to see where you're working.
Since you're cutting the glue, the grille may not stick as well when reassembled.

Antes de poner de vuelta la placa de aluminio con el mismo secador de aire caliente puedes calentar los restos de pegamento adherido y lo montas . Pones la rejilla de tela en su lugar y lo dejas una hora apoyado con la parte trasera mirando hacia arriba.asi el pegamento recalentado y con la presión del peso del aparato hará que se adhiera.

Olga Ona -