Atari 5200 Entertainment System Power Button Replacement

Scritto Da: Alan Abelson
  • Commenti: 0
Atari 5200 Entertainment System Power Button Replacement

Difficoltà

Easy

Passi

4

Tempo Necessario

15 - 20 minuti

Introduzione

If your Atari Entertainment System has a power button that needs to be repaired, this guide will take you step-by-step on how to gain access to the power button in order to repair it.

  1. HvVxHMp56rHoXTW1

    • Gently flip the Atari Entertainment System over. You'll see 7 screws holding the system together. Use a philips head screw driver to remove all seven screws.

    • Pictured above is the Atari 5200 upside down. The orange edited circles over all 7 screws.

  2. tYgDEp6yQN5illdy

    • Gently flip the Atari Entertainment System over to the front side. Remove the top.

  3. ZYsXtquLOUntNDn1
    ZYsXtquLOUntNDn1
    RO2KfA4JNPEfvgBD
    beuJWDlsgears2uf

    • There are orange objects on the side of the system's top, pinch them.

    • If the triangles cannot be gripped, push the power button on the opposite side. This will lift the triangle to give access to easier grip.

  4. 5FsVXXLN4OTDtZdS
    5FsVXXLN4OTDtZdS
    YvoayhVAcoYyTyQY
    PaTHgwOCsvgExMVI

    • The Power button can now be removed/clean/replaced.

    • Be sure to keep an eye on the spring.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Alan Abelson

Membro da: 26/09/14

233 Reputazione

0 commenti