Atari 5200 Number Pad Cleaning or Replacement

Scritto Da: Alan Abelson
  • Commenti: 0
Atari 5200 Number Pad Cleaning or Replacement

Difficoltà

Moderate

Passi

5

Tempo Necessario

15 - 45 minuti

Introduzione

The number pad, while not used in many games, can become unresponsive over time due to dislodged/dirty sensors. Reseating and cleaning them can improve number pad responsiveness of your Atari 5200.

  1. TRwJgmKYnsjMtEXN
    TRwJgmKYnsjMtEXN
    DBY1rK1f53tKPcGp
    rgBMSDUKOGeBiTdB

    • Turn the controller over.

    • Remove the three 6mm screws from the back.

    • Carefully slide and pull the two parts of the controller shell apart, exposing the innards.

    • Do not move the joystick when reassembling. This will break your alignment. The less the joystick is moved, the easier it will be to realign the joystick.

  2. JfxVVNitVvVCneVe
    JfxVVNitVvVCneVe
    SXLPkZpp1CakEw5v
    WZvCjTBOa2HUdWa2

    • Take out the rubber button module of the number pad.

    • Blow out dust on the number pad sensors with compressed air.

    • Wipe the sensors clean with a cloth dabbed with alcohol.

  3. i2D4NdWsqAQgO3lM
    i2D4NdWsqAQgO3lM
    E5iy3DRaQSEaBksH

    • Use a spudger to remove the top frame.

    • Take off the plate.

    • Remove the rubber buttons.

  4. TFMiaZnkj1vTGHjk
    TFMiaZnkj1vTGHjk
    NTEARyGSxIk4HxZd

    • Pull the circuit strip through the new space.

    • Realign the top and bottom of the controller.

  5. hPW5xIYJigabUOBt
    hPW5xIYJigabUOBt
    H1leulyvhfgFA5Je
    Zu2VNNjp5SexV2CO

    • Return the buttons to the top of the controller.

    • Snap the frame back into place.

    • Screw the screws back into place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Alan Abelson

Membro da: 26/09/14

233 Reputazione

0 commenti