Audiovox CR8030iE5 Speakers Replacement

Scritto Da: Nab Sengupta
  • Commenti: 0
Audiovox CR8030iE5 Speakers Replacement

Difficoltà

Moderate

Passi

9

Tempo Necessario

15 - 20 minuti

Introduzione

If the speaker in your Audiovox CR8030iE5 is no longer functioning, it’s likely that you have a faulty speaker that needs to be changed. The speaker is a crucial component of your device. Its primary function is to emit sound to alert or wake up a user at a predetermined time.

This guide will walk you through the steps to replace a faulty speaker and install a new one. Please note that each speaker contains a powerful magnet; exercise caution by keeping it away from any nearby metal objects.

  1. 4SOhSXjBLdkc15Xw

    • Turn the device upside down.

    • Apply constant pressure to the base of your Audiovox, while holding the plastic casing until the casing is completely removed.

  2. mYIcuHSu3IXM1klQ

    • Remove the four screws from the base using a Phillips #1 screwdriver.

  3. kVoDpDgFq5KB3JI5

    • Turn the device right-side up.

    • Gently pull the top panel off of the device.

  4. vgaQJZfgbGEoZ2UC

    • Using a Phillips #1 screwdriver, remove the screw found in the middle of the board.

  5. P5t2khU2lJCa3tqB

    • Pull back the board gently to avoid disconnecting the attached wires.

    • This allows you to view the soldered connections on the other side, and the internal components.

  6. jrgOD1LyL6GmnxNq

    • Notice that there are two speakers located on opposite sides of the inside of your Audiovox.

    • Slide a plastic opening tool along the rim of the faulty speaker where it meets the plastic casing.

    • This action removes any glue or adhesive that holds the speaker to the wall of your Audiovox.

  7. XXqByBPBIyqjHWrU
    XXqByBPBIyqjHWrU
    T5fNkb2UlvP3Ggbp

    • Using your thumb, applying constant pressure, pull back the plastic tab towards the speaker and away from the metal bracket.

    • Simultaneously insert a Phillips #00 screwdriver into the square hole on the underside of clock and push through to lift the metal bracket off of the plastic tab.

  8. FYtIsSKyUmFsKnmU

    • Repeat the second part of "Step 7" for the other hole.

  9. DWUi5ayItaiPQETD

    • Pull up on the metal brackets, found on either side, until the speaker is completely removed. Removing the speaker is rather challenging. Don't get discouraged if it takes multiple attempts!

    • Each speaker contains a powerful magnet. Try to keep them away from nearby metal objects.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Nab Sengupta

Membro da: 18/04/13

55 Reputazione

0 commenti