Introduzione
How to move the battery recess sticker to access the controller's back screw.
Strumenti
- 
                  
                  
- 
            
Unplug all cables from your controller before starting.
 - 
            
Completely power off your controller.
 
 - 
            
 - 
                  
                  
- 
            
The sticker in the battery recess hides a back cover screw.
 - 
            
If you don't care about damaging the sticker, you can puncture through the center and skip the next step.
 - 
            
Use a hair dryer to heat the sticker and soften the adhesive securing it.
 
 - 
            
 - 
                  
                  
- 
            
Use the point of a spudger to push up a corner of the sticker until you can grab it with a pair of blunt nose tweezers.
 - 
            
Use your tweezers to peel up the sticker until the back cover screw is accessible.
 
 - 
            
 
                            
                            Conclusione
                          
                          To reassemble your device, follow these instructions in reverse order.