Introduzione
Use this guide to replace the right trigger on your Backbone One.
Strumenti
- 
                  
                  
- 
            
Lift up the upper cover of the controller.
 - 
            
Swing the upper cover over and place it on the controller case.
 
 - 
            
 - 
                  
                  
- 
            
Use a pair of tweezers to remove the yellow protective tape which is placed over the interconnect cable and the connector.
 
 - 
            
 - 
                  
                  
- 
            
Use the tip of an opening pick to open the gray flap of the interconnect cable ZIF connector by pushing it upwards.
 
 - 
            
 
                            
                            Conclusione
                          
                          To reassemble your device, follow these instructions in reverse order.
Opening didn’t go as planned? Answers community for help.
2 commenti
where can I buy a right trigger replacement?
where can I buy a right trigger replacement?