Beats Studio 3 Headband Replacement

Scritto Da: Ivan
  • Commenti: 0
Beats Studio 3 Headband Replacement

Difficoltà

Moderate

Passi

4

Tempo Necessario

15 - 30 minuti

Introduzione

Look at this guide if your Studio 3 Beats headphones are broken from one side or both. After a particular time, a piece of the headband, which keeps the headphones in the proper position, will break. It can be fixed by replacing the headband.

  1. EK46MdAfcdxl2rN5

    • Slide the headband down to reveal the the screws

    • Unscrew both screws from each side of the Headphones.

  2. cIZGLgoBK3ScKA3e
    cIZGLgoBK3ScKA3e
    uXRdCRiaARxcMeD2
    XaKwkpvloibjC2PX

    • Remove the foam pad

    • Remove the cushion pad

    • Remove the broken headband.

    • Keep the cushion pad and foam pad to the side.

    • When removing the cushion pad, you will have to use some force and will make a snapping noise, which is normal.

  3. vPuEGVyXuvupnBgN
    vPuEGVyXuvupnBgN
    WcjWRoRFZmSPGN6D

    • Get the new headband and snap back the cushion pad together.

    • Put back the foam pad together.

  4. DRQBZIXZHCbxnvsb
    DRQBZIXZHCbxnvsb
    yudBroBJlLtUlLjF

    • Screw in both screws on each side of the headphones.

Conclusione
  1. locate screws and unscrew
  2. remove cushion, foam, and broken headband
  3. remove any broken plastic inside the clasps
  4. get the new headband and place it on the headphones; make sure the letter B is on the left and the S on the right of the headphones
  5. place foam and cushion with the headband. It will make a snapping noise if done correctly
  6. screw in the screws

Autore

Ivan

Membro da: 23/08/23

163 Reputazione

0 commenti