BlackBerry Curve 8310 Lens Replacement

Scritto Da: Sean Willis
  • Commenti: 0
BlackBerry Curve 8310 Lens Replacement

Difficoltà

Easy

Passi

6

Tempo Necessario

5 minuti

Introduzione

  1. RlJnfVYTSRvjKrWc

    • Press down on the battery release button and slide the back cover up with your thumb.

  2. teAmjMSl3QlGXZYr

    • Pry from the top of the battery to pull it out.

  3. IjCORSSRqgwCsjlD

    • Slide the metal sim card cover to the unlock position.

    • Remove the sim card.

    • The arrows on the sim card enclosure indicate the lock and unlock positions.

  4. hDM54xxTORcRSHYq

    • Remove the two T5 Torx screws circled at the top of the phone.

    • The T5 Torx screws may be covered by a white sticker.

  5. wWixdBjUgttQWMgP

    • Remove the red cover at the bottom of the phone.

    • You may have to work a spudger underneath to release the plastic clips.

  6. Qv4p6OsbGelfh1bj
    Qv4p6OsbGelfh1bj
    6xPZiSKQB6bf6Jsm
    RYtTKSCYwHWIfBOY

    • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

    • Use a spudger to pry the front cover away from the side panels.

    • Work the spudger around the entire phone until the front cover is free.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Sean Willis

Membro da: 26/01/12

229 Reputazione

0 commenti