Introduzione

This guide will allow you to access the subwoofers on either side of the Bose Cinemate 10. By removing the end caps, you can clean them or replace the subwoofers.

  1. ZtAXyUwuiVgKHmnk
    ZtAXyUwuiVgKHmnk
    yXlIA6WyRK4SKMA2
    • Using the blue plastic opening tool, pry up on the cloth covered end panel. The edge of end cap cover should separate from main body of device.

  2. WapGNK2IbcVCiIDV
    • Using your fingers, lift up on the end cap cover until it separates completely from the main body of the device.

  3. FTnEY6sjSFsbe6BE
    FTnEY6sjSFsbe6BE
    y3kI4XmFAupJIFJp
    • Remove the 4, PH1, 15mm screws on the side speaker cover frame.

  4. IbUWlLtFQppL4pHb
    • Remove speaker cover frame from main body of device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Maranda Queen

Membro da: 26/09/18

133 Reputazione

0 commenti