Canon EOS 30 Lens Mount Rings

Scritto Da: Antonia
  • Commenti: 2
Canon EOS 30 Lens Mount Rings

Difficoltà

Easy

Passi

8

Tempo Necessario

10 minuti

Introduzione

The three stacked rings in the lens mount ring can be safely and easily removed.

  1. TGVWrjnYLtjkMFA2

    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. IPLNHYPpHmCOHSJf

    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. SBZy1TStnuPPdPea

    • Remove the 4.8 mm black screw on the left side of the camera.

  4. DUJQI5mCdYhWNZHR

    • Remove the front panel by lifting it away from the camera's body.

    I need a video tutorial

    Abdullah dicky S -

  5. TkGoMrlVN1kEdAZP

    • Remove four 7.1 mm silver screws from lens mount ring.

  6. IVKS5KAuenqnwnFT

    • Remove outer mount ring.

    • The silver button may detach.

  7. bakptgXLMEZwqHBK

    • Remove thin gold ring.

    • Correct orientation is pictured.

  8. a4oOUC5CGdeFKyrq

    • Remove thin silver ring.

    • Correct orientation is pictured.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Antonia

Membro da: 17/04/11

124 Reputazione

Un commento

Very handy. One addition though - the silver button lever is on the wrong side - it is not facing the mirror box but the plastic lens release button. Plus, you are missing the fact that there is a spring underneatch the silver leaver which keeps the mount pin coming back up.

Patryk Granatowicz -