Introduzione
This guide will show you how to replace the screen casing of your Canon PowerShot G1 X camera. The screen casing protects the camera's display screen and ensures it functions properly. If you've accidentally damaged the casing, follow these step-by-step instructions to safely replace it.
A damaged screen casing can cause exposed components, further damage to the camera, and reduced device functionality. If you see visible damage or experience issues with your camera's screen, it's important to perform this repair.
Before you begin, make sure your camera is powered off and the battery is disconnected for safety. Consider wearing anti-static wrist straps and gloves to handle sensitive components. Back up your data to avoid any loss during the repair.
Strumenti
-
-
You can now remove the back side of the screens casing. When removing this back casing there will be a clear plastic piece inside. Remove this as well. If this is the piece you are replacing, remove it and then replace it with the new piece and skip to conclusion.
-
-
-
Once the plastic piece has been removed locate the two screws on the outside and inside of the casing located in the photos. Remove these screws in order to begin the process of removing the front part of the casing.
-
-
-
Once the two screws have been removed you must then locate the four prongs on the metal piece covering the back of the screen shown in the photo. Push each of these prongs in toward there parallel and pull up on the metal casing.
-
-
-
Once all of the prongs are pushed and the metal casing is removed you then can remove the front casing.
-
To reassemble your device, follow these instructions in reverse order.
