Canon PowerShot SD700 Outside Case Replacement

Scritto Da: Emilio Rossi
  • Commenti: 0
Canon PowerShot SD700 Outside Case Replacement

Difficoltà

Easy

Passi

6

Tempo Necessario

5 - 10 minuti

Introduzione

This guide will help you remove and replace the outside case of the Canon PowerShot SD700. Follow the step-by-step instructions to remove the outside case of your Canon PowerShot SD700. You will need Phillips #00 screwdriver to complete the steps throughout the guide.

  1. qYKF5GXMXCgO5D5O

    • Turn off the camera by pressing the power button above the LCD screen.

  2. tuRtbvBEwOERpACe

    • Remove the two, small screws on the bottom of the camera using a Phillip's #00 screwdriver.

  3. UJyBXyDKiI5Jqh3J

    • Use a Phillips #00 screwdriver to remove the two, small screws on the right side of the camera.

  4. Qs2evXXk4gNhZM5q

    • Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out Digital label.

  5. YBbt6BODIFR5p5dM

    • Use a Phillips #00 screwdriver, remove the screw on the bottom of the camera near the battery and memory card slots.

    • This screw will be longer than the rest of the screws.

  6. Nk1plWGxIQHAJwE4

    • Remove the front, back, and side casings from the camera and set to the side.

Conclusione

To reassemble your device, follow steps 1-6 instructions in reverse order.

Autore

Emilio Rossi

Membro da: 07/04/11

113 Reputazione

0 commenti