Canon Powershot ELPH 100 HS Battery Replacement

Scritto Da: Lillia
  • Commenti: 2
Canon Powershot ELPH 100 HS Battery Replacement

Difficoltà

Very easy

Passi

2

Tempo Necessario

5 minuti

Introduzione

If your battery light has turned on for you camera, it is dying, and will need a new one, use this guide to help with replacing the battery. This is a very simple procedure, so you have nothing to worry about.

  1. TWGH1BEFRwCatOVG
    TWGH1BEFRwCatOVG
    PaPpARHCRNc5DMaX
    OXPNHbWxk55WLaA4

    • Locate the battery cover on the bottom of your camera.

    • Slide the tab to the right to open the battery cover.

  2. 3VjtsfISpLcIXJaq
    3VjtsfISpLcIXJaq
    4Yor2QGNYKLWxCVl

    • Flip the battery cover open.

    • Using your fingers, slide the battery out of the camera.

    • This was not the original battery that came the camera, so yours may look different.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Lillia

Membro da: 17/03/15

255 Reputazione

2 commenti

What if the internal time/date battery is bad? A fully charged battery will drain crazy fast because the rechargeable internal No longer charges. Is there a fix?

S Silvia -

Hi @ssilvia, there isn't a guide specifically for the CMOS or coin cell battery replacement but the Canon Powershot ELPH 100 HS Outer Case Replacement guide has an image that confirms there is a coin cell battery. It looks like you should be able to access and replace it. The photo is a little blurry so I couldn't read the specific size. I hope this helps or at least this might get you started on the repair. Thanks!

Sarah Westberg -