Come pulire l'alloggiamento della Cartuccia del Nintendo 64

Scritto Da: tonymag28
  • Commenti: 15
Come pulire l'alloggiamento della Cartuccia del Nintendo 64

Difficoltà

Molto facile

Passi

2

Tempo Necessario

5 minuti

Introduzione

Pulire l'alloggiamento della cartuccia del Nintendo 64 può risolvere molti dei problemi che può avere lo stesso.

  1. 62QYHJE4YRd2Dmrm

    • Apri lo slot con un dito. Soffia dell'aria lungo la fenditura con una bomboletta di aria compressa.

  2. lAKjJbC1TPgY4lhE

    • Imbevi un batuffolo di cotone con dell'alcool. Fallo scorrere lungo tutto l'alloggiamento della cartuccia.

    I never knew about this step, up until now i was just doing step one

    Mike Chang -

    Alcohol is not going to "shine up" the pin. The secret will take 10 seconds!!!!. A worn out paper fingernail file .. I have never had a console brought back in 2 yrs

    thegamestorems -

    What type brand of fingernail file?

    Bresee -

    Nice idea-- i was wondering what would fit in there between the contacts and not be too stiff so as to break anything but still offer just enough resistance and abrasion. I will surely give this a try.

    Kevin K -

Conclusione

Se pulire lo slot della cartuccia ha funzionato, dovresti essere in grado di inserire un gioco e farlo girare normalmente. Se ciò non dovesse funzionare, controlla che i pin della cartuccia non siano danneggiati e che non necessiti di una pulita.

Autore

tonymag28

Membro da: 28/10/09

2154 Reputazione

11 commenti

Oh, my God! I really didn't think the alcohol thing would work (actually, I thought it was going to scr#w my nintendo), but it did! Thank u so much!

silvestrerenata -

I'm a Iittle skeptic to use rubbing alcohol on my N64 system and games are you 100% sure it works and won't give me any problems downs the road.

James Hernandez -

You should use isopropyl alcohol, it’s 90% alcohol and drys very quickly. I usually dunk a q-tip in, tap it against the bottle to remove any excess, then clean the surface. As long as your not pouring the alcohol directly onto your electronics you’ll be fine.

Adam -

This works because water and other liquids contain minerals that are conductive, thus, by having it on a running electronic device, it will cause a malfunction/short, whatever you call it, HOWEVER, if the device is off, no electricity is flowing, thus the rubbing alcohol does what you want it to, and removes all the dirt and grime preventing your games from playing..

Bloxy -

This was great!

notoriousVKC -

Alcohol will not remove the tarnish on the brass pins in the console. A paper fingernail file

Up & down back & forth 1 time. Have 500 consoles in store. 8 1/2 years never had a cartridge system ever come back toy store. Takes 5 seconds & cost a nickel.

Michael -

Can you please explain how you do it? What materials are you using. Sorry but english is not my native language.

Andres Corona -

Wow, this tip just saved my n64! Thank you

Michael P -

I just rub some 99% ipa on a game’s pins and jam it in and out of the console like 5 times. Works like a charm.

Matt V -

Micheal,

I really like your comment, “Alcohol will not remove the tarnish on the brass pins in the console. A paper fingernail file Up & down back & forth 1 time. Have 500 consoles in store. 8 1/2 years never had a cartridge system ever come back toy store. Takes 5 seconds & cost a nickel.” I would like to buy a paper fingernail file, is there one on amazon you could recommend?

Charles Runyon -

What if I don't have an air compressor?

Matthew K. -