Crain Jamb Saw 775 2014 Blade Replacement

Scritto Da: Tarun Thiruma
  • Commenti: 0
Crain Jamb Saw 775 2014 Blade Replacement

Difficoltà

Easy

Passi

2

Tempo Necessario

5 - 15 minuti

Introduzione

This guide will demonstrate how to replace the blade in your Crain 775 Jamb Saw.

  1. khLePdMumrBtQqyv
    khLePdMumrBtQqyv
    REUtIHISksoykdLe
    RaQBsMhWUpBKoHHl

    • Unplug the power cord before you begin.

    • The saw blade is sharp, in order to prevent injury, you may want to wear protective gloves when handling it.

    • Depress the spindle lock button to prevent the blade from spinning when you unfasten it.

    • While depressing the spindle lock, use a 3/16 hex key to remove the socket set screw securing the blade in place.

  2. 6A4AdK6ITgy4yq2B
    6A4AdK6ITgy4yq2B
    w32GyylIqFMmnUfY

    • Remove the blade.

    • When replacing with a new blade, ensure the two pegs on the face of the rotor mate with the holes in the blade.

    • Tighten the new blade with the socket set screw firmly before use. Ensure the spindle lock is pulled before turning the saw on.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Tarun Thiruma

Membro da: 20/11/19

35174 Reputazione

0 commenti