Dell Precision 5520 Base Cover Replacement

Scritto Da: Johnathan Hammond
  • Commenti: 1
Dell Precision 5520 Base Cover Replacement

Difficoltà

Easy

Passi

1

Tempo Necessario

2 - 4 minuti

Introduzione

  1. fjZpEBrJVLYqG3KB
    fjZpEBrJVLYqG3KB
    mSQ3qxiXs6KWRIWW

    • Be sure to power off and unplug your device before you begin your repair.

    • Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).

    • Pry the edges of the base cover and lift it to remove it from the computer.

    • NOTE: Use a Torx #5 screwdriver for the base screws and a Phillips screwdriver for the two M2x8 screws inside the badge flap.

    Dell official maintenance guide is available at: https://dl.dell.com/topicspdf/precision-...

    The base base cover removal is documented in section 'Disassembly and reassembly'.

    Raphaël Bleuse -

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Johnathan Hammond

Membro da: 28/02/18

44808 Reputazione

0 commenti