Disassembling IBM ThinkPad 560z Upper Case

Scritto Da: Derek Driscoll
  • Commenti: 0
Disassembling IBM ThinkPad 560z Upper Case

Difficoltà

Moderate

Passi

9

Tempo Necessario

10 - 15 minuti

Introduzione

How to open up the IBM ThinkPad 560z

  1. 31DPPCuVNwNdkTrg

    • Slide the battery release latch to the right.

    • Pull out the battery out towards the front of the device.

  2. VLkFL2UfT6Avn6wX

    • Remove the 7 mm Phillips #0 screws.

    • Remove the 10 mm Phillips #0 screws.

    • Remove the 14 mm Phillips #0 screw.

  3. YQ3s3lITJaXxSCNf
    YQ3s3lITJaXxSCNf
    usAFDpMjSYxJoFyN

    • Open the flap on the left hand side.

  4. KdhnFNUWxMDIFbht
    KdhnFNUWxMDIFbht
    RBfWQgDyMXEGKqN1

    • Insert the plastic opening tools between the right and left sides of the latch.

    • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

  5. ZVfWmXFW1bjZeXmj
    ZVfWmXFW1bjZeXmj
    qXOgpy1FtrImEMkr

    • Open the flap on the right side.

  6. YZb4nrmyEiOPCkvT

    • Insert the plastic opening tools towards the right side of the latch.

    • Gently pry the right side out to release the top cover.

  7. v6xk3s11FGIGoEuL
    v6xk3s11FGIGoEuL
    4rssWmqTTQafTdhg

    • Lift the keyboard slowly.

    • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

  8. Fsqs41ePJIKwPW1j

    • Use your fingers or a spudger to detach the connector.

  9. UyDXc35JRDNJVCjX
    UyDXc35JRDNJVCjX
    HCyNMETCC5vDRCiV

    • Carefully lift and remove the keyboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Derek Driscoll

Membro da: 15/04/10

119 Reputazione

0 commenti