Disassembling Samsung HMX-W300

Scritto Da: Robert
  • Commenti: 0
Disassembling Samsung HMX-W300

Difficoltà

Moderate

Passi

5

Tempo Necessario

5 minuti

Introduzione

Shows how to open up the camera without damaging interior content.

  1. BNmHkWcQcrODFUKD
    BNmHkWcQcrODFUKD
    AI5JlIaFPUNjHtVt
    uswsBt2EYeXqvYfo

    • To remove the wristband of the device, grab the middle loop and pull the band through.

  2. K3WKCATvQHQ1M4W5
    K3WKCATvQHQ1M4W5
    JIITAkUOIuwtKUmK

    • Remove four screws with a Hex 1.5 mm screwdriver.

  3. RZj2rOK6nIHckbVo
    RZj2rOK6nIHckbVo
    GnC2SIBLqQC23o5F
    VUtuooT4nFGseUvl

    • Open the HDMI door on the side of the camera.

    • Remove the single screw using a Phillips #00 screwdriver.

  4. NrSjitKJob6b3qMd
    NrSjitKJob6b3qMd
    CDKulyPt123tnQCR
    N4fKfaAwHSpnoEeO

    • Use the iFixit opening tool on both sides on the device. Pry apart both sections with light force.

    • Do not apply too much force. There is a wire that attaches the front case with the rear case that can be damaged.

  5. gnNBexMYluHVlOnX
    gnNBexMYluHVlOnX
    EnJFUx2WaFRdfwEK
    SyyOmVPrFAlUtFSi

    • Pull the wire ribbon out with a pair of tweezers.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Robert

Membro da: 22/01/15

966 Reputazione

0 commenti