Disassembling

Scritto Da: Tarissa Miller
  • Commenti: 1
Disassembling

Difficoltà

Moderate

Passi

6

Tempo Necessario

25 minuti

Introduzione

If you are having issues with your Bose SoundDock XT and want to save money and repair the device yourself, you have come to the right place. These instructions will help you disassemble the SoundDock XT.

  1. MSw3xpgbevcuZOfw

    • Remove six 10 mm length screws from the bottom panel of the SoundDock.XT using a #1 Phillips screwdriver.

    Send video about this video

    Mohan Cheery -

  2. vlMv5MyEOtRVj6UU

    • Remove the Front Panel, use a #2 Phillips screwdriver to remove the two 6.5 mm length front panel screws located under the bottom cover (highlighted in red circles in the photo).

  3. XhignerfKmiQSDDV

    • Next, use a plastic opening tool to slide under the edge of the front cover. Start edge located at the top of the left or right speaker and work your way around the speaker. Remove the front cover.

  4. CUUiLHd2AwfeGdxc
    CUUiLHd2AwfeGdxc
    KciZlKGv6utunUmG

    • Use a wide nose tweezer to remove six rubber grommets from the front of the SoundDock XT.

    • Using pointed tweezers may damage the rubber grommet.

  5. OeX31kpgDpBCIyqJ

    • Use a #2 screwdriver to remove the six 8.5 mm length screws from the speaker cover.

  6. vNAFEPXBDSrpLEaV

    • Using a metal spudger, slide between the outer case and the front speaker cover. Work your way around the cover and remove the speaker cover. You now have access to the speakers.

    • Using the metal spudger may damage the plastic speaker cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Tarissa Miller

Membro da: 01/10/15

218 Reputazione

0 commenti