Dyson Cinetic Animal Stabilizer Wheels Replacement

Scritto Da: Jarod Kinney
  • Commenti: 0
Dyson Cinetic Animal Stabilizer Wheels Replacement

Difficoltà

Moderate

Passi

5

Tempo Necessario

10 minuti

Introduzione

The small wheels on the bottom of the Dyson DC47 Cinetic Animal are important for helping the vacuum move. They are simple to replace.

  1. ErDkeCuyybCs1SLa

    • Press the gray button to release the canister.

  2. rvyYKlDOoCJLjdeV

    • Remove the canister by lifting it out.

  3. 2eFQer5AfGIKW11P

    • Locate the small plastic stabilizer wheels on the vacuum.

  4. MDPUrSRQIkJEomxa

    • Remove Stabilizer Wheel assembly by removing the 19 mm screw shown in the picture using a T15 Torx bit.

  5. qjVNZLiECmEejxqB

    • Remove small plastic piece holding wheel assembly together.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Jarod Kinney

Membro da: 26/01/17

179 Reputazione

0 commenti