Electric Eel Drain Cleaner RK34IC100 Belt Adjustment

Tools needed and Safety recomendations.

https://www.homedepot.com/p/Husky-6-Ton-...

https://www.homedepot.com/p/Husky-1-2-in...

https://www.homedepot.com/p/Husky-SAE-Me...

Arrange a clean and organized working area.

Start by placing the bottle jack ontop of the metal with the corner being on lip of the structur.

After its set on the lip line the middle/top of the bottle jack with the bolt of the snake motor mount

Adjust the rode of the bottle jack up till the rods head and the bolt have a nice firm and connection

Do Not: Over crank the rod with too much torue. Place the rode on the edges of the head of the rod too prevent slipage when torue is applied.

Using a 1/2" wrench, take off the Hex nut on the Screw dog point.

Using the 5/32 Head on a alen wrench, unscrew till the head of the screw is loose.

Tip: Use the bar of the bottle jack as a breaker bar for more leverage.

Crank the bottle jack up and feel for tention.

When your at the desired tention. Plug the snake into an outlet and flip the switch too ON.

Squeez the petal too test if unit is at the desired hight and tention

Raise: Raise the rode and motor

Lower: Lower the rod on bottle jack