Introduzione
If your Ematic Model FTABMP2 has a cracked or damaged screen, refer to this guide to learn how to replace it. The screen on this device is a Full 4.3 LCD Screen Display with Touch Screen Digitizer Glass Panel.
Make sure your device is powered off before you begin.
Strumenti
-
-
Gently insert the blue spudger in between the two sections of the tablet and go around breaking the glue seal.
-
Gently take off the back side of the tablet.
-
-
-
Locate the light grey clamp on the motherboard and gently use two index fingers to disconnect the black LCD cable from the motherboard.
-
Conclusione
To reassemble your device, follow these instructions in reverse order.
