Epson BrightLink 450wi Power Cord Replacement

Scritto Da: Evan Sandoval
  • Commenti: 0
Epson BrightLink 450wi Power Cord Replacement

Difficoltà

Moderate

Passi

4

Tempo Necessario

15 minuti

Introduzione

The power source is the part the Epson Brightlink 450Wi you'll interact with the most. It includes all the ports you'll need in order to connect your device cables. The solution to many connection issues can be found through these ports. In the event of a connection issues or when in need of replacement, follow this guide.

  1. lOFOrKpqv1FDfBwy

    • Flip projector upside-down.

    • The panel cover for the power source is on the projector's left side when upside-down.

  2. FkHWvXBmxoduGKCx
    FkHWvXBmxoduGKCx
    T4LBVZVbqrhV4dCT

    • Begin unscrewing the two 11 mm screws that are attached to this cover plate. These screws will come loose and can be removed and placed in a safe location.

  3. NUfbsRCHOW5uocks
    NUfbsRCHOW5uocks
    yIs6yK3JJxtp2oAR
    QsZtHZBOq3fluTRk

    • Once the screws are removed begin pulling the cover plate off gently.

    • It will come off in one smooth motion by pulling away towards the left of the projector.

  4. 3J6VC6xcAlTfSIjn
    3J6VC6xcAlTfSIjn
    oiNXtKhQXPoyqloE
    qKEdmCLv3eIPnHZP

    • Once the cover plate is removed, lift up the device and you will be able to see the plug for the power source.

    • To plug in, ensure the prongs on the plug are facing the right way to slot into the device power source port.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Evan Sandoval

Membro da: 11/09/23

441 Reputazione

0 commenti