Eufy RoboVac 11S Drive Wheels Replacement

Scritto Da: Kayden Anderson
  • Commenti: 0
Eufy RoboVac 11S Drive Wheels Replacement

Difficoltà

Moderate

Passi

5

Tempo Necessario

10 - 30 minuti

Introduzione

If your RoboVac 11s is having trouble moving around, the issue may come from the drive wheels. This guide will walk you through replacing the wheels and getting your machine working again.

  1. 6U3OZZQVAEDblDmg

    • Turn off the RoboVac's power and flip it over onto a soft surface.

  2. UcPuZdAThZQ4GYSm

    • Remove the side brushes by pulling them off.

  3. x1TJtvYDylsnvirX

    • Use the Phillips screwdriver to remove the four 5 mm screws in front of the wheel being replaced.

  4. nSsXgSfsYI22hKOC

    • Lift the wheel slightly and disconnect the spring and cable connected to it.

    • Wiggle the cable gently to detach it.

  5. L3giFEWeMNQwTwG4

    • Fully remove the old wheel.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Kayden Anderson

Membro da: 08/09/23

242 Reputazione

0 commenti